The "Pentagonal Star" is the "Geometric Instruction" which allows access to the "Pentagonal
Permanent Libraries".
The "Star" can be Rotated into 4 different Positions.
The Head of the "Star", relates to the "Program" i.e. the "Upper World", the "Lower World",
the "Written Program Register", (on the Left) and the "Output Register" on the Control side
(Right Hand Side).
Here is a Drawing, showing, Octagonal Registers in each of the Points of the "Pentagonal Star".
The 1st Position.
The "Upper" Point of the "Pentagonal Star" Points to the "Upper" Octagonal Register shown
highlighted in YELLOW.
It is the Head of the "Star" which Points to One of the 4 Program types of The "Running Program".
The "Upper" Left and Right Points of the "Star", Points to the Octagonal Registers the "Books"
are accessed through.
The "Lower" Left and Right Points of the "Star", Points to the Octagonal Registers which allow
access to the "Libraries" of Both the "Picture" (Data) and "Scratch Pad" Registers.
If the "Star" is Rotated Left 90°....
The Head of the "Star" now points to the "Octagonal Register" allowing Access to
the "Written Program" Libraries.
The "Left hand" Upper and Lower Points of the "Star" now Point to the Upper
and Lower "Program Books" of the "Program Library".
The Right hand Upper and Lower Points of the "Star" Point to the "Control" (Upper Right)
and the "Scratch Pad Libraries" (Lower Right).
And if the "Star" is turned 90° further to the Right....
The Head of the "Star", now points to the "Lower Octagonal Register" which allows
access to the "Lower World" (this universe at present)
The "Lower Left" and "Right" Points of the "Star" Point to the "Picture or Data
Octagonal Register", allowing access to the the "Books" of both the "Picture" or "Data"
(on the Left side) and the "Scratch Pad Libraries" (on the Right hand side).
The Upper Points of the "Star", now point to the "Program" (Upper Left) and "Control"
(Upper Right) "Libraries".
And if the "Star" is Rotated Left, another 90°....
Now the Head of the "Star" Points to the "Output Register" (Right hand side).
The "Upper" and "Lower" Right hand points of the "Star", point to the Octagonal Registers
allowing access to the Upper "Control Library" and the Lower "Scratch Pad Books".
The 2 Left hand Points of the "Star" Point to the Lower "Picture" or "Data Libraries"
and the Upper "Program Libraries".
The Octagons used to access the various Programs, Libraries and "Books" are All of the Ring
of 16 RED Octagons and the Large Octagonal Frame.
The Frame here is Highlighted in BLACK.
And here showing the Ring of 16 "Octagonal Registers".
When the desired "Book Register" has been Selected the next Format in the Program,
appears in the Center Register where the "Parallelogram" is displayed in the mid location.
This "Parallelogram" is from the "Control Register". (Indicated by the direction it slopes in.)
And here in the "Upper Sector" of the Register.
And the "Lower Sector".
This next drawing, shows the Library "Partitioning" Framework in the "Libraries".
And the Program Register "Parallelogram"...
NOTE;
To gain the full understanding, please Start this "Thesis" from the beginning at 0001
if you haven't already...