This post involves some of the other
Functions we will be using in this "Communication" Program.
I have already revealed some of the
"Permanent Library" Formats in past Posts.
I should remind you that the Geometric
forms such as "Squares", "Rectangles",
"Parallelograms", "Octagons", "Hexagons", "Discs", "Pentagons" etc.
are all Program "Instructions" which are displayed on a "Stage" for the Purpose
of "Communication" between the 2 Ends of each individual's Mind.
"Communication" can only take place
between "Partitions" of "The True Mind"
if consent exists between the 2 Entities or more, involved.
One example of this is of course, in the case of the "Communication Interface"
where many may be involved in a Common "Transport System", or in the case
of a "Movie" being watched by a number of individuals.
It must be remembered there are in
place, programs within the workings of the construct
which "Polices" and "Governs" the overall system.
These
programs have always existed from the beginning, and can't be "Hacked"
or changed by anything, or any
individual "Partition" of LIFE, thank goodness...
In the case of the Permanent Library
"Instruction" which is a "Hexagon", the angles
of the 6 sides are the same. ( Re. the "Internal Angles"
of the 6 Corners are 120°. )
But there are other Hexagonal
"Geometric Instructions" whose Angles are NOT 120°.
Here is a Drawing showing the Structure
of these "Hexagonal Instructions" used
in processing, involving the "Temporary
Libraries".
Note the 2 Different Corner
angles, 135° and 90°.
These
Hexagons are used with the "Temporary Contents Register".
The
following I will show in the Center Section.
There
are Hexagons in the following Orientations, Vertical, Horizontal, 45°,
and 22.5°.
I will reveal the "Hexagons" in the Vertical and
Horizontal Orientations in this Post
and the 45° and 22.5° Orientations for a later date.
This
Drawing Reveals the Vertical "Hexagon" in the Central (Primary)
Register.
And
here a Copy of the "Vertical" Hexagon,
Rotated and superimposed on the Vertical
"Hexagon".
And
in this next Drawing, presenting them as Black and Gray Frames Only.
Note
both the Outer and Inner "Squares", formed by the overlapping "Hexagons".
There
are 3 Positions the Vertical "Hexagon" can be installed in;
a. The
Left Hand Side.
b. The
Center.
and
c. The
Right Hand Side of the same Register.
And
the same applies in the Horizontal Orientation.
a. The
Upper.
b. The
Center.
and
c. The
Lower.
Here
are the "Partitioned" Components for the Vertical "Hexagon".
This "Hexagonal" Register is also a Temporary Register, as well as the
"Square" Register
it is in.
First;
the Vertical "Hexagon" itself, in the Center...
The
Hexagon is "Partitioned" into sub Partitions.
First;
a "Square" on Edge in the
"Lower" of the "Hexagon".
And
also in the "Upper" of the same "Hexagon".
These 2 "Squares" on Edge are the
"Upper" and "Lower" Registers of a
"Running Program".
This
next Drawing shows the Upper "Book" of
the Lower "Running Program" Register.
This
next Drawing Shows the (Icon) "Instruction" for this
"Book".
And
now the Lower "Book" for the Upper "Running Program" Register.
The
Hexagonal "Instruction" also has a "Square"
on its Side in the Middle of the "Hexagon".
Which
came from a copy of the Vertical "Hexagon" being Rotated 90° and
Superimposed
on the Vertical "Hexagon".
This
"Square" represents the Center Register ("Primary
Accumulator") "Book".
And
here Divided in 2, displaying the Upper and Lower "Books" of the "Primary
Accumulator".
This
next Drawing shows the "Book" (Icon)
"Instruction", for the Left Hand "Book"
of the Right Hand "Running
Program" Register.
And
the Right Hand "Book" (Icon)
"Instruction" for the Right Hand "Book" of The Left Hand
"Running Program" Register.
"Running Program" Register.
This
next Drawing shows the Left Hand "Book"
(Icon) "Instruction" of the "Primary
Accumulator".
and the Right Hand "Book" (Icon) "Instruction"
of the "Primary Accumulator".
Here
is another example of "Partitioning" within the "Hexagonal Geometric
Instruction".
The Register "Points" to the Left Hand Register of this "Running Program".
The Register "Points" to the Left Hand Register of this "Running Program".
And here the Register "Points" to the Right Hand Register
of this "Running Program".
This
Format is used for "Communication" inside any Register, using any
written Language
as well as writing Program "Script" to any of the Registers.
as well as writing Program "Script" to any of the Registers.
Note; This Format provides 3 Windows for Communication, and is one of the most used Formats.
and
In
this Next Drawing, the "Communication Format" shown in the above Drawing,
is shown with One of the "Octagonal" Registers.
This is used to "Write" to the "Octagonal" Registers.
is shown with One of the "Octagonal" Registers.
This is used to "Write" to the "Octagonal" Registers.
The Same Format can in fact be used to "Write" to most Registers, including "Square",
"Hexagonal",
and "Pentagonal" Registers.
In
my next Post I will reveal more, regarding this style of
"Communication Format",
and another Function used in the "Processing System".
NOTE;
To gain the full understanding, please Start this "Thesis" from the beginning at 0001
if you haven't already...
and another Function used in the "Processing System".
NOTE;
To gain the full understanding, please Start this "Thesis" from the beginning at 0001
if you haven't already...