0015 Accessing The Permanent Libraries

0015

To gain "Access" to the "Main Permanent Libraries" is achieved through an Instruction
whose Geometric Form is a 6 Pointed Star.

Note there are also "Pentagonal Libraries" as well.

These are accessed using a 5 Pointed Star, but more about these at a later date.

The whole "Processing System" is made up of "Conceptual" layers, so windows are cut
through the layers to allow access to the desired layer or "Face".

Here is the "Geometric Instruction", seen from the Processing Side. (and its Faces)

The "Request" for this "Star" to be seen in your Vision, is the "Upper Case" Greek Sigma
looking "Glyph". (Reversed)

This is the Format for the Request "Glyph".

The "Octagons" and "Hexagons" in the next drawing are the geometric functions for accessing
the "Permanent Libraries".

There are 2 Groups of 12 "Octagons" in a Rotated "Octagonal Frame", a total of
24 "Octagons".

These are "Registers" are allocated or used to insert Glyphs used in the Programs.

This is One of the Sets of 12 "Octagons".

This is the Second Set of 12 "Octagons".

The "Star" can be Rotated into any One of any 4 Positions.

These are their "Positions" in their order anticlockwise.

The 1st Position...

The 2nd Position...

The 3rd Position...

And its 4th Position...

 This is HOW the appropriate Register is Selected.

The YELLOW "Octagon" is the Request.

YELLOW is the "Color Code" meaning the Present or Existing.

First The Star...

Then the Request...

This refers to the "Outer" Program of The "Contents" and the "Upper" Register of the 7
( One Register in the Center, and 6 Registers the "Star" points to) has been Chosen.

And here another Register.

In the Next Drawing a Little YELLOW "Octagon" has been used as the Request.

The "Star" is Rotated within the Confines of the INDIGO "Octagonal Frame" which governs
the "Stars" Geometric Shape.

RED is The "Color Code" for Control.

As the "Star" in this Case is BLUE ("Importing")  and the Control is RED the Frame appears
as Color Coded INDIGO.

NOTE;

To gain the full understanding, please Start this "Thesis" from the beginning at 0001
if you haven't already...

0014 The Temporary and Permanent Libraries

0014

Before we get into the Structure of the Universe and the Program, which produces
the "Holographic Experience" in all of us, I will use the "Eye Matrix" to explain
the Components and functions of the "Processing System".

Here are the Programming Components of "Eye Matrix" allowing Access
to the "Temporary Libraries".

The Processing System uses Color Codes.

The Color YELLOW indicates the "Present".
and
BLUE indicates an "Import".

These "Squares" highlighted in BLACK are Access to the Main "Temporary Libraries"
which contain the Programs which are relevant to your Experience at the time.

These Register Locations vary in their Color Code depending on what is taking place.

These "Squares" are the following Registers where we access the Main Libraries.

We can tell that these are the Main Library Temporary "Access Registers", because
the Frames are on their sides.

The Identifying of the Register is set by the Geometry in this case the Squares in question
are on their sides.

If the "Squares" were on edge then they would represent the Temporary "Running Program"
which has been separated of from the Main Libraries.

The Frame refers to the "Outer" Program. The Color represents the type of Register.
The Location of the Square indicates the Registers Origin. There are 4 Origins shown here
Highlighted in BLACK.

The Upper Left Square Register is "The Program Register".
The Upper Right Square Register is "The Control Register".
The Lower Right Square Register is "The Scratch-Pad Register".
The Lower Left Square Register is "The Picture" or "Data Register".

Note; All Data is in the form of Geometric Images.

This is why we often refer to the "Data Register" as The "Picture Register".

Even Letters or other Fonts i.e. writing consist of "Strings" of  "Stick Pictures".

The "Squares" Highlighted in BLACK are the Primary Accumulators to Each of the 4
"Main Temporary Libraries".

And shown in the next 2 Drawings, the 4 Sub registers of the "Program Register".
This applies to the Other 3 Registers as well.

And the 5 Registers of the "Program Register"

A "Hexagonal" based "Partition Map" is used for the "Permanent Libraries",
which can Not be altered.
However any thing from these Libraries can be copied, Edited and "Stored"
in the form of a new Program.

Just as these "Partitions",

are a Component of this Layer.

The Hexagonal "Partitioning" is like this.

And is formed from these 2 One Rotated 90° to the other.

Rotated 90°

And these are on a layer like this format.

If we Rotate this pair of "Faces" we would see this in our sight...

This pair is the Rear "Face" of the "Processing System".

In reality if we desire to load a "Folder" from the Main Permanent Libraries a "6 Pointed Star"
is used which I will show in my next Post.

NOTE;
To gain the full understanding, please Start this "Thesis" from the beginning at 0001
if you haven't already...