Next
is the "3" Instruction
Here
is the "Profile" of the "3" Instruction".
The
"3" Instruction, is founded on the 1st Rotations, involved
in the "Awakening" as is also
the "S" Instruction shown in a previous post.
But
in this World, the Earth (Program) these "Glyphs" represent something else today,
than the in the
Original ZION Language (NOT Hebrew)
The
Original ZION Language was the Geometric based Language of LIFE or "The True
Mind"
i.e. "Awareness".
The
"3" Instruction can also be used in its Rotated
Orientation.
This
is the "Glyph" the Greek Lower case letter ω (Ω)
came from.
This
next Drawing, shows the Origin of the 1st Rotations discovered by The
Mind
i.e. LIFE in the "Awakening", Eons
ago.
I have only presented, theses next 2 Drawings, to remind you of
the 1st, 2 "Building Blocks".
a. "To & Fro". (Straight Lined)
and
b. "Rotation". (Curved)
discovered during the "Awakening".
and
The "Editing" Orientation.
The
"3" Instruction indicates or Enables the 2 "Round" Registers, in this case the Upper
and Lower "Running Program" Registers.
The
Upper "Running Program" Register
And
the Lower "Running Program" Register.
And
both together.
If
we consider the "To & Fro" action taking Place in the "3"
Instruction, we find the 2 "Rings"
of 8 "Octagonal" Registers Rotate in
the same Direction.
And
Unlike
the "S" Instruction where the 2 "Rings" of 8 "Octagonal" Registers Rotate
in "Opposite" Directions !
And
These
"Rings" of 8 "Octagonal" Registers are Located inside the Main "Running Program"
Library Registers.
And
the "Editing" Mode or Orientation.
These "Squares" Highlighted in BLUE, are the Importing "Temporary
Libraries"
for the "Running Program".
And
the Main "Temporary Library" Registers.
This
next Drawing shows the Upper "Running Program" Registers.
And
One Group of the "Group of 12" Registers, I will explain more about in
the future.
These
involve the Vertical Orientated Registers, relating to the Main "Library" Registers
of the "Running Program".
and
the other Group, of the 12 Registers.
These
involve the Horizontal Orientated Registers, relating to the "Editing" Registers
of the "Running Program".
And
in the next Drawing, the "Group of 12" Registers.
NOTE;
To
gain the full understanding, please Start this "Thesis"
from the beginning. (at Post 0001)