0045 More "Programming" Instructions

This post reveals another version of the "Ʒ" Instruction, the "5" Instruction,

and some other "Glyphs".

Here is the Profile of the "Ʒ" Instruction.

Once again, like in the other 2 forms of the "3" Instruction this version also involves
2 "Components".

a. The Round Register

and

b. The Square "Temporary Library" Registers.

1st The "Round" Register.

Which is presented in the "Square" Format, to access the "Temporary Library" Registers.

But notice, unlike the 1st "3" Instruction I revealed in an earlier Post, instead of having
a "Ring of 8" Octagons, this "Ʒ" Instruction utilises a "Ring of 12" Octagons instead.

The "Ring of 12" is located within the 4 Large "Octagons", involved with the Inner

"Running Program" Registers.

To do with the "Running program".

________________________

This next Instruction involving the "Ring of 12", is like a "Branch" Instruction

to the Inner "Temporary Library" Registers, involving 2 "Functions" Linked together,

both of which are in the "Control" Register.

Here is another "Profile" for One of the "5" Instructions.

Again the Structure of the "5" Instruction involves the "Round" Register which contains

the "Ring of 12" small "Octagons", in the Lower World, and Straight Line work

(The Upper section of the "5" Instruction) selects 2 Partitions within the "Control" Register.

a. The "9 Gates", involving the Larger "Octagons".

b. The "Control" Register in the Group of 6 Registers in the Vertical Orientation.

and

c. The 4 "Partitions" involving the Sectors of the "Temporary Library" Registers.

This next drawing, shows the "Partition" in the "Control" Register which is also part
of a set of 6 "Partitions" in the Vertical Orientation.

These are the "Components" of these 6 "Partitions".

The Upper Left Partition is the "Program" Register.

The Upper Right Partition is the "Control" Register.

The Mid. Left Register is the "Written Program" Register used here in "Editing".

The Mid. Right Register is the Output "Control" Register

The Lower Left Register is the "Picture" (Data) Register.

The Lower Right Register is the "Scratch Pad" Register.

This Drawing shows the "Control" Register, of the Group of 6 Registers in the Vertical
"Orientation".

And here with the 4 Corner Main "Temporary Library" Registers superimposed on

the Group of 6 Registers in the Vertical "Orientation".

Here is a Register in the Location of a "Corner" Register.

Let us say, it is in the Location of the "Control" Register of the "9 Gates" shown as
a YELLOW Frame.

When the "Corner" Register shown in the above Drawing as a YELLOW Frame, it becomes

the "Primary Accumulator" of the "Control" Register of the other 4 Registers, shown in

the Drawing Below.

And these 2 Registers Highlighted in BLUE are the "Upper" & "Lower" Registers.

(of The Running Program)

And of Course the "Primary Accumulator" inside the YELLOW Frame which is in this case,

is the "Control" Register of the "9 Gates".

And these 2 Register Highlighted in BLUE in the Drawing below, are the "Left" & "Right"

Registers of the "Running Program".

The Registers I have described above, are shown in the Drawing below.

These Exist within the 4 Main "Temporary Library" Registers.

I have only Highlighted the Left hand Register in YELLOW, to make things easier to see

and understand.

And here again showing the 2 Adjacent Registers together and their Frames.

The next Drawing, shows the 4 Large "Octagonal" Registers, Enabled by
the "5" Instruction.

And the 4 "Square" Registers (Temp. Library Reg.) on their Edge forming
the "Punning Program" Registers.

________________________

Here is another form of "5" Instruction.

And this One involves another Different "Function".

1st The Profile of this "5" Instruction.

This next Drawing reveals the "Components" involved.

This "5" Instruction involves the "Control" Register of the "9 Gates"
and a "6 Pointed Star".

The 6 Pointed "Star" is the "Component" used to Load Programs from the Permanent
"Libraries" through the "Octagonal" Registers.

Here is a bit of a review involving the "6 Pointed Star"

So I have placed the "6 Pointed Star" in the "Primary Accumulator" of the Stage
to explain its Components again.

The "Star" shown in the previous Drawing, was displayed in this Orientation.

This drawing below, shows the "Hexagonal" Registers in the Rear "Face", together
with the 6 "Octagonal" Registers used in Programming "Communication".

Note; The 7th "Octagonal" Register can't be Directly accessed here, indicated in the Drawing

as having a RED "X" over it, Not in the Mx, but which I have added in this case.

Each "Hexagon" is Allocated an "Octagonal" Register, located in the Centre of Each
"Hexagon".

The next Drawing shows, the 2 "Sets" of 6 "Hexagonal" Registers, One "Set" superimposed

on the other.

The "Star" is housed in a MAGENTA Coloured "Octagon", Rotated 45°, which Controls

the "Stars" Image as it is Rotated into its 4 Different "Orientations".

RED for "Control".

BLUE for "Import".

BLUE and RED = MAGENTA.

Here are the 4 Orientations of the "6 Pointed Star".

and

This next Drawing shows, a pair of the "Orientations" together. 12 "Star" Points

And the other pair.

And here once again but showing All 4 Orientations together. A Total 24 "Star" Points.

The next Drawing shows One of the "Star" Orientations with its 6 "Octagonal"
Register Locations.

And again, this time Rotated 90°.

This is often displayed as law enforcement badges.

This Drawing below shows One of the Registers being Enabled by a YELLOW filled
Octagon.

And here showing the Registers involved Highlighted in BLUE.

The Rotated (A "Slide and Rotate" controlled by the MAGENTA Octagon.) to another Register,

shown here Highlighted in BLUE.

__________________________

Here is another "Control" Instruction.

I have Highlighted the Registers involved in BLUE.

Showing 1st The "Control" Register of the "9 Gates".

Now, the 4 "Secondary Accumulators" involving The Main "Inner Temporary Library"

Registers.

And Lastly the "Picture" (Data) Register of the Group of 6 Registers, part of the Group
of 12 Registers, which I shall reveal more about in the near future.

And its "6 Pointed Star" in a different Location than in the "5" Instruction.

And here showing the Registers, "Geometric" Instruction and the "6 Pointed Star".

And the 6 Large "Octagonal" Registers, the "Star" Points to.

Note though, in this Drawing, I have changed the Size of the "Instruction" so the Location

of the "Star" is Now in another Location.

__________________________

The next Drawing shows, another "Control" Glyph or Letter Instruction.

And the Locations of the small "Octagonal" Registers.

__________________________

Here is another "Geometric" Instruction showing its small "Octagonal" Registers

and "Temporary Library" Registers,

And again revealing the small "Octagonal" Registers and the Square "Temporary Library"

Registers.

__________________________

And another "Geometric" Instruction.

NOTE;

To gain the full understanding, please Start this "Thesis" from the beginning. (at Post 0001)